12V
12V System
12V roofline architecture based on C5204-A and the GC08 12V control-box platform.
- Roofline light
- C5204-A
- Control box
- GC08 12V
- Capacity
- 350W / 600W
Permanent outdoor lighting / System architecture
Choose the voltage architecture first. Build the complete system around it.
G&D SMART organizes permanent roofline projects by system voltage. After the voltage and fixture platform are selected, choose GC08 capacity, mounting, cabling and control requirements for the project.
A professional permanent-lighting system is more than the light.
Use the same planning sequence for every project so the fixture, control box, installation hardware and software are specified together.
- 01
1. System voltage
Select 12V, 24V, 36V or 48V according to the approved fixture platform and project architecture.
- 02
2. Roofline light
Select the fixture family and spacing that match the installation and product strategy.
- 03
3. GC08 capacity
Choose 350W or 600W after confirming the project load, branch layout and cable plan.
- 04
4. Mounting & wiring
Match the track, extension cables, connectors and signal accessories to the selected fixture family.
- 05
5. Control & software
Confirm the control platform, firmware route, App requirements and installer workflow for the final project revision.
Voltage options
Compare the four roofline system architectures.
The voltage identifies the electrical architecture. GC08 350W and 600W are capacity options inside each voltage platform.
24V
24V System
24V architecture with multiple current roofline fixture families and the GC08 24V platform.
- Roofline light
- C5204-B / C5205 / P23A
- Control box
- GC08 24V
- Capacity
- 350W / 600W
36V
36V System
36V roofline architecture based on C5204-C and the GC08 36V control-box platform.
- Roofline light
- C5204-C
- Control box
- GC08 36V
- Capacity
- 350W / 600W
48V
48V System
48V roofline architecture based on C5206 and the GC08 48V platform. Final installation accessories and software route remain project-confirmed.
- Roofline light
- C5206
- Control box
- GC08 48V
- Capacity
- 350W / 600W
GC08
GC08 capacity is selected after the voltage.
Every 12V, 24V, 36V and 48V architecture is planned with 350W and 600W GC08 capacity options. Final capacity should be checked against fixture count, total load, branch distribution, cable length and the installation layout.
Compare 350W vs 600WWhat should be confirmed before a system is quoted?
A voltage page is a system starting point, not a substitute for project engineering. Confirm the actual installation inputs before the BOM is finalized.
- Target application and roofline layout
- Fixture family, spacing and total light count
- Voltage and total calculated load
- Number of branches and cable lengths
- Track, connectors and signal-accessory requirements
- Control platform, firmware and App requirements
Build a system that can be installed, supported and scaled.
Share the target market, voltage, project length, control requirements and certification goals. We will help structure the product and system configuration.