G&D SMART / Professional outdoor lighting
Certification & Compliance
Certification and outdoor suitability must be confirmed for the exact supplied model and system configuration.
UL / ETL Documentation
Request certification documentation for the exact fixture, controller, power supply or component model being supplied. A document for one product does not automatically establish the status of every component in a complete system.
Wet / Damp / Dry Location
Outdoor installation conditions vary. Confirm the marked location rating and installation conditions of the exact product before specifying it for an exposed roofline or other outdoor location.
Class 2 & Low-Voltage Design
Class 2 suitability depends on the power source, output limits and complete electrical configuration. Confirm the approved power and branch architecture for the selected system.
System Documentation
Keep the product specification, controller revision, power architecture, wiring drawing and applicable certification documents together as one project record.
Request model-specific compliance documents
Original Certification Documents
View the full reference library
Read certificates at component level
| Record | What to confirm |
|---|---|
| Fixture | Exact model, standard, file number and location rating |
| Power supply / control box | Model, input/output limits, protection, source classification and report scope |
| Cable / connector | Component identity, ratings, approved use and wiring configuration |
| Complete system | Explicit coverage of the assembled configuration; component certificates alone do not establish this |
The supplied SHLED certificates retain their original holder and model scope. They are reference evidence, not a statement that every G&D SMART roofline system is covered. Product pages distinguish imported catalog notation from verified model-specific certification.
Location evidence guide · Class 2 and output documentation
Scope of the supplied certificates
| Document | Holder / model scope | Standards and record |
|---|---|---|
| UL certificate supplied by G&D SMART | Shenzhen SHLED Technology Co., Ltd. O50B, P24B, P23A, P12A; C6605-X, C6507-X, C5205-X, C5204-X, C6305-X, C6618-X X is the certificate's commercial-code suffix; confirm the supplied revision and voltage. |
UL 2108 (US); CSA C22.2 No. 250.2 (Canada). E549391-20251104. UL-US-2591321-0 / UL-CA-2566862-0. Issued 2025-11-06. |
| ETL Authorization to Mark reference | Shenzhen jindian Zhiguang Lighting Co.,Ltd. XD14, XD15, D18A, D15A, JD33, JD42, WD38, WD48, KD42, D30K. |
UL 2108 / CSA C22.2 No. 250.2. Control 5025126; report 221027012SZN-001; issued 2023-06-26. |
The supplied documents identify representative models and their original holders. Confirm the current certification record, product mark and instructions for the exact purchased configuration. These pages do not claim that C5206, GC08, every cable or a complete assembled roofline system is covered by these documents. No wet/damp or Class 2 status is inferred from the certificate pages.
Plan your next step with G&D SMART.
Share your application, target market and system requirements.